/*
    Brainuino Aleph

    Copyright (C) 2011, 2014  Dmitry Mikhirev

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/


/* arduino pinout
digital pins 0 and 1 reserved for PC connection
digital pins 2 and 3 must be used for interrupts */

#ifndef pinout_h
#define pinout_h

// undefine the following if your LCD does not support Russian font
#define RUSSIAN

enum {

// digital pins connected to LCD display
  LCD4  =  7,
  LCD6  =  8,
  LCD11 =  9,
  LCD12 = 10,
  LCD13 = 11,
  LCD14 = 12,
/* pins 1 and 5 of LCD must be connected to GND,
pin 2 - to +5V
pin 3 - to 10K potentiometer
pins 15 and 16 (both optional) - to +5V (thru 50-100 Ohm resistor)
and GND respectively
pins 7-10 - no connection */

// digital pin connected to speaker
  SPEAKER = 5,

// digital pin connected to LED lamp
  GREENLAMP = 13,
  REDLAMP   =  6,

// digital pins connected to players' buttons
  BUTTON1 = 14,
  BUTTON2 = 15,
  BUTTON3 = 16,
  BUTTON4 = 17,

// digital pins connected to control buttons
// start/OK button
  CONTROL1 = 18,
// break/cansel button
  CONTROL2 = 19,

// digital pin connected to encoder button
  ENCPUSH = 20,

// digital pin connected to encoder 'B' output
  ENCODERB = 4,
// encoder 'A' output must be connected to Arduino D3
};

#endif